Cornwall College Duchy College Bicton College Falmouth Marine School CCB Training

Filter Courses

Keywords


Course Types (0 selected)

Subject Areas (1 selected)

Locations (1 selected)


Courses

15 results found

Introduction to Turning

No Qualification • Part-time • Cornwall College Camborne


This introduction to Turning course will teach you to how to select, mount and use work holding equipment along with the types and applications in cutting tools used in turning operations.

Apply Now   View Course

Introduction to Manual Milling

No Qualification • Part-time • Cornwall College Camborne


Learn how milling machines operate and the types of cutting tools and work holding devices.

Apply Now   View Course

Unvented Hot Water Supply, Commissioning & Servicing NICEIC

Professional Qualification • Part-time • Cornwall College Camborne


This course is suitable for all plumbers and engineers involved in the installation, commissioning, service and repair of hot water systems, solar thermal hot water systems or air source/ground source heat pumps. To enrol on this course, you will need: A recognised competence in a conventional fuel (i.e. gas, oil, or solid fuel) or a relevant plumbing qualification such as an NVQ level 2 or equivalent experience A WRAS approved Water Regulations qualification An Energy Efficiency qualification issued by a 17024 UKAS accredited body During this course, you will cover: Building Regulations Approved Document G Water Regulations 1999 Unvented hot water system design Installation requirements The programme is 75% theoretical with 25% practical assessment. Upon successful completion, you will have the knowledge to work safely on unvented hot water systems in accordance with all relevant legislation.

Apply Now   View Course

Metal Fabricator Apprenticeship Standard

Level 3 • Work-based • Cornwall College Camborne, Cornwall College St Austell


This occupation is found in the advanced manufacturing engineering and engineering construction sectors. The broad purpose of the occupation is to carry out metal fabrication work using things such as rolled steel joists, columns, channels, steel plate and metal sheet etc. Work includes manufacturing bridges, oil rigs, ships, petro-chemical installations, cranes, platforms, aircraft, automotive and machinery parts, sheet metal enclosures, equipment supports, and anything that can be fabricated out of metal. Fabricators can work alone or in teams, in factories or on operational sites. Fabricators use a large range of metals including steel, aluminium and titanium at a range of thickness's from 0.5mm up to over 20mm. The size and weight of the fabrications can range from components that can easily be picked up by hand, to massive structures that require several cranes to manipulate. In their daily work, an employee in this occupation interacts with planners, supervisors, inspectors, designers, welders, pipe fitters, fitters, machinists, riggers, steel erectors, stores personnel, painters and many others involved in manufacturing, production, maintenance and repair. An employee in this occupation will be responsible for the quality and accuracy of their own work whilst ensuring it conforms to a relevant specification such as an engineering drawing or an international standard. Fabricators are also responsible for the health, safety and environmental (HS&E) protection of themselves and others around them.

Apply Now   View Course

HNC Engineering

Level 4 • Part-time • Cornwall College Camborne


This programme is ideal if you have completed your A Levels and are looking to progress into the engineering sector, or you are working as an engineering technician and would like to develop your knowledge and skills in the engineering industry. The programme brings together the requirement for technicians to be well versed in engineering principles and also to develop specialist knowledge in an area of their choosing. The programme offers a broad engineering curriculum covering mathematics, engineering science, material science, computer-aided design, manufacturing, automation, control systems and business, plus an option to study specialist modules. Completing this programme will make you more versatile, more knowledgeable, multi-skilled and professionally competent in your chosen career. A variety of different teaching styles enables you to learn effectively, ensuring that you have the right knowledge and skills to excel in the workplace. The programme will also equip you with communication, team working and time management skills, making you a more effective student and employee.

Apply Now   View Course

FdSc Engineering

Level 5 • Part-time • Cornwall College Camborne


This programme prepares you for a career in a variety of engineering disciplines and develops the concepts, knowledge, skills and techniques required for today’s competitive and dynamic engineering industry. The programme consists of core modules and a series of optional modules, allowing you to focus your learning in areas of interest. Modules of study in the fields of mechanical, electrical, design, production, marine and control engineering, are included to allow for a wide range of possible career goals. The modules have been written with the aid of industry to ensure that the content meets industry needs; they include current best practice and insight into the changing face of engineering technology. You will have a series of structured lectures, project-based practical activities and industrial visits to help inform and develop your learning. These activities will increase your ability to solve engineering problems, develop your project management skills and help you gain an understanding of the role of engineering in the modern technological world. All modules will consider the modern world of engineering and will contextualise material to reflect on engineering practice. It is suggested that you undertake around 150 hours of work experience in an engineering field to support your learning. We will help you to find an appropriate placement if you are unable to find your own.

Apply Now   View Course

Diploma in Engineering Technologies

Level 3 • Full-time • Cornwall College Camborne, Cornwall College St Austell


Engineering shapes the world around us, from the machines at the heart of industry to the electronic devices we use at home – engineering is the future. There’s no better place to start your career in this exciting industry than here at Cornwall College. If the world of engineering does fascinate you, then this is the perfect course for you. The focus is on developing your knowledge application, experimental, research and practical engineering techniques. Whilst preparing you to professionally present your findings and demonstrate these essential skills. You’ll be using industry-standard technology as you work on exciting practical projects, studying a diverse range of engineering areas such as fabrication and welding, machining, electrical, maintenance, manufacturing. You will cover content including pneumatics and hydraulics, welding techniques, manufacturing processes, electrical systems (industry motors and drives), PLCs, steam and refrigeration systems, it’s the perfect start to a career in engineering. Engineering at level 3 comes with a considerable academic content preparing you for a potential future at a University; as well as the expected maths and science there will be units covering project management, design, engineering drawing, business and quality systems; arming you with an academic background to take on any challenge. At Cornwall College we have enthusiastic and highly skilled engineering tutors who are fully committed to helping you develop the skills, knowledge and experience needed to becoming a fully qualified engineer. This course is offered at both Cornwall College St Austell and Cornall College Camborne. Our Camborne workshop features industry-standard equipment and kit. We have strong links with Pendennis and A&P ship yards and train all their apprentices and also PALL and SERCO for aero, so employers know an engineering qualification from The Cornwall College Group means you will start off in your career with the very best skills for an incredible journey in engineering.

Apply Now   View Course

NICEIC Water Regulations

Professional Qualification • Part-time • Cornwall College Camborne


This course is suitable for all plumbers and engineers involved in the installation, commissioning, service and repair of hot water systems, solar thermal hot water systems or air source/ground source heat pumps. You will be provided with a comprehensive learning package to understand the requirements of Water Regulations and its effects on water supply organisations and individuals. Topics covered will include: Water Regulations 1999 Pipework and fittings Tightness testing Cleansing and flushing of water systems Commissioning Maintenance and repair Water Regulations prevent misuse, waste, undue consumption or erroneous measurement of water and, most importantly, to prevent contamination of drinking water.

Apply Now   View Course

Welding Skills - ARC/MIG (Evening)

No Qualification • Part-time • Cornwall College Camborne


This course is perfect if you are a complete beginner or have limited welding knowledge. Ideal if you want to learn a new skill, if you are creative, if you want to repair your own car or even a garden gate. On this course you will learn a basic understanding of the different Welding processes used in industry and at home. Gaining a basic understanding of Manual Metal ARC welding (stick) and Metal Arc Gas Shielded (MIG), covering Flat and H/V single weld beads, re-joining of runs, welding outside corner joints, Butt welds and horizontal/vertical fillet welds on 3-6mm thick plate. The MIG/Mags welding section will cover the setting-up of the machine (gas, volts and wire speed etc) for correct operation to deposit welds in the horizontal/vertical and Flat welding positions, material thickness 1-6mm. " You will require fire resistant overalls and steel toe capped boots/shoes for this course. Also due to Health and Safety guidelines we would recommend that you wear glasses instead of contact lenses if you require them. This course runs on a Wednesday evening from 6.00pm to 8.00pm for 8 weeks. Venue:- Cornwall College Camborne Trevenson Road Pool Redruth TR15 3RD

Apply Now   View Course

Diploma in Engineering Technologies

Level 2 • Full-time • Cornwall College Camborne, Cornwall College St Austell


Engineering shapes the world around us, from the machines at the heart of industry to the electronic devices we use at home – engineering is the future. There’s no better place to start your career in this exciting industry than here at Cornwall College. This course is all about mastering the essential skills that you’ll need during your engineering career, giving you experience with the very latest technology that is used within the industry. The focus is on developing your knowledge application, experimental and practical engineering techniques. Whilst preparing you to professionally present your findings and demonstrate these essential skills. You will be using cutting edge technology such as virtual welding equipment; practising with the latest high spec. equipment such as welding machines commonly used by coded and specialist welders and wiring electrical panels donated by local employer, containing the latest control and automation components – experiences that prepare you for employment locally, regionally and beyond. The Level 2 course is the perfect opportunity to discover the area of engineering you would like to specialise in, with tutors who will guide you through all of the potential opportunities. At Cornwall College we have enthusiastic and highly skilled engineering tutors who are fully committed to helping you develop the skills, knowledge and experience needed to becoming a fully qualified engineer. Successful completion of this course provides you with essential skills to progress onto the Level 3 Advanced Technology course or the Level 3 90 Credit Diploma in Engineering.

Apply Now   View Course

  Across The Cornwall College Group


Diploma in Engineering Technologies

Level 3 • Full-time • Cornwall College Camborne, Cornwall College St Austell


Engineering shapes the world around us, from the machines at the heart of industry to the electronic devices we use at home – engineering is the future. There’s no better place to start your career in this exciting industry than here at Cornwall College. If the world of engineering does fascinate you, then this is the perfect course for you. The focus is on developing your knowledge application, experimental, research and practical engineering techniques. Whilst preparing you to professionally present your findings and demonstrate these essential skills. You’ll be using industry-standard technology as you work on exciting practical projects, studying a diverse range of engineering areas such as fabrication and welding, machining, electrical, maintenance, manufacturing. You will cover content including pneumatics and hydraulics, welding techniques, manufacturing processes, electrical systems (industry motors and drives), PLCs, steam and refrigeration systems, it’s the perfect start to a career in engineering. Engineering at level 3 comes with a considerable academic content preparing you for a potential future at a University; as well as the expected maths and science there will be units covering project management, design, engineering drawing, business and quality systems; arming you with an academic background to take on any challenge. At Cornwall College we have enthusiastic and highly skilled engineering tutors who are fully committed to helping you develop the skills, knowledge and experience needed to becoming a fully qualified engineer. This course is offered at both Cornwall College St Austell and Cornall College Camborne. Our Camborne workshop features industry-standard equipment and kit. We have strong links with Pendennis and A&P ship yards and train all their apprentices and also PALL and SERCO for aero, so employers know an engineering qualification from The Cornwall College Group means you will start off in your career with the very best skills for an incredible journey in engineering.

Apply Now   View Course

FdSc Engineering

Level 5 • Part-time • Cornwall College Camborne


This programme prepares you for a career in a variety of engineering disciplines and develops the concepts, knowledge, skills and techniques required for today’s competitive and dynamic engineering industry. The programme consists of core modules and a series of optional modules, allowing you to focus your learning in areas of interest. Modules of study in the fields of mechanical, electrical, design, production, marine and control engineering, are included to allow for a wide range of possible career goals. The modules have been written with the aid of industry to ensure that the content meets industry needs; they include current best practice and insight into the changing face of engineering technology. You will have a series of structured lectures, project-based practical activities and industrial visits to help inform and develop your learning. These activities will increase your ability to solve engineering problems, develop your project management skills and help you gain an understanding of the role of engineering in the modern technological world. All modules will consider the modern world of engineering and will contextualise material to reflect on engineering practice. It is suggested that you undertake around 150 hours of work experience in an engineering field to support your learning. We will help you to find an appropriate placement if you are unable to find your own.

Apply Now   View Course

HNC Engineering

Level 4 • Part-time • Cornwall College Camborne


This programme is ideal if you have completed your A Levels and are looking to progress into the engineering sector, or you are working as an engineering technician and would like to develop your knowledge and skills in the engineering industry. The programme brings together the requirement for technicians to be well versed in engineering principles and also to develop specialist knowledge in an area of their choosing. The programme offers a broad engineering curriculum covering mathematics, engineering science, material science, computer-aided design, manufacturing, automation, control systems and business, plus an option to study specialist modules. Completing this programme will make you more versatile, more knowledgeable, multi-skilled and professionally competent in your chosen career. A variety of different teaching styles enables you to learn effectively, ensuring that you have the right knowledge and skills to excel in the workplace. The programme will also equip you with communication, team working and time management skills, making you a more effective student and employee.

Apply Now   View Course