18th Edition Wiring Regulations
This qualification is primarily aimed at practising electricians with relevant experience and other allied professionals e.g. surveyors, consultants and other trades needing to update and enhance their understanding of IET Wiring Regulations. It is also suitable for anyone wishing to demonstrate an understanding of the IET 18th Edition Wiring Regulations (BS7671) 2018. There are no […]
Course Categories
Aeronautical Engineering Diploma
Study for a top-flight engineering career and learn industry standard techniques that are recognised across all engineering disciplines, by restoring our very own plane! If you would like to become an aeronautical engineer or technician, in industry or with the armed forces, then this course will teach you the skills you need to start your […]
You wish to become an engineer or technician within the aeronautical or service community.
Course Categories
Aircraft Maintenance Diploma Level 2
Aviation is at the forefront of technology and is currently suffering a shortage of skilled people. Aircraft can range from simple single seat microlights to large wide bodied airliners with up to a thousand passengers, with helicopters and fast jets in between. Whether you are interested in flying or engineering, either in the civil industry […]
You are interested in flying or engineering, either in the civil industry or the military.
Course Categories
Biomass Installation HETAS H005DE
Bicton EaRTH is a fully approved HETAS training Centre. We deliver the HETAS H005DE (Direct Entry) Biomass Installer and H005DE Bridging training courses. Biomass appliances and systems are becoming increasingly popular. These HETAS courses enable installers to develop the knowledge and skills required to select, install, commission, service and maintain biomass appliances in accordance with […]
Course Categories
Business Improvement Techniques NVQ Diploma Level 2 EAL
This course enables those working in a manufacturing or processing role as an operator, supervisor or manager to gain knowledge of the tools that will reduce cost, minimise waste and improve productivity with a focus on a real operational project. Course cost: £175-£1450* *Prices vary subject to criteria.
Course Categories
Electrical Installation Diploma Level 3
During this one-year Level 3 programme you will complete your electro-technical training which will enable you to gain employment in the industry in either commercial, industrial, agricultural or domestic locations. This is now the default qualification for the traditional route to becoming an electrician whether or not you’re employed by an electrical contractor or not. […]
You would like to pursue a career as an electrician and have completed the Level 2 qualification.
Course Categories
Electrical Installation Inspection Testing Certification & Reporting Award Level 3
This course is for those who wish to become fully conversant with regards to inspection, testing and commissioning of fixed electrical installations. You have to be currently active in the trade and have a basic knowledge of inspection, testing and commissioning to enrol on the course. Course cost is £800 combined with Initial Verification & […]
Course Categories
Energy Efficiency Building Regulations L1 NICEIC
Following the revised Building Regulations published April 2005, from April 2006, all installers wishing to certify their own work under Gas Safe Registration legislation, (rather than call Local Authority Building Control) must hold a certificate in Energy Efficiency for Domestic Heating. This course can help you deliver your responsibilities under the Home Energy Conservation Act. […]
Course Categories
Engineering Diploma Level 3
Engineering remains one of the UK’s most important industries, offering a diverse range of exciting employment opportunities, from design to tool making. During your studies you will learn the principles of engineering so you can then specialise in areas such as manufacturing, plant operations and repair, machining, welding and fabrication This Level 3 qualification is a […]
You would like to spend a year as a full time student learning the essential skills in engineering, exploring your career options and building core skills.
Course Categories
Engineering Installation and Commissioning NVQ Diploma Level 2 EAL
This course is suitable for anyone carrying out a range of engineering maintenance activities in the workplace but with no formal qualification. This course can also enable progression onto a Level 3 qualification or an apprenticeship. Candidates would need to be working in a suitable environment with regular regular access to engineering maintenance tasks. The […]
Course Categories
ENGINEERING INTERMEDIATE PROGRAMME LEVEL 2
Engineering remains one of the UK’s most important industries, offering a diverse range of exciting employment opportunities, from design to tool making. During your studies you will learn the principles of engineering so you can then specialise in areas such as manufacturing, plant operations and repair, machining, welding and fabrication. We offer two options for […]
You want to develop hands-on skills as well as academic knowledge.
Course Categories
Engineering Maintenance & Installation NVQ Diploma Level 2 & 3 EAL
This course develops the skills needed for engineering maintenance occupations and will encourage you to further add value your contribution to the workplace. This nationally recognised qualification recognises your competence in one or more engineering activities and provides justification that could court towards your job role. Course Costs: Level 2 £175-£1450* Level 3 £175-£2600* *Prices […]
Course Categories
Engineering Technical Support NVQ Diploma Level 2 & 3
This course is ideal for individuals who are working in engineering technical support roles who wish to improve their skills or knowledge. Level 3 will build on existing knowledge and develop advanced skills. Course costs: Level 2 £175 – £1450 […]
You are working in an engineering inspection environment or you are new to engineering maintenance but are looking for a career change and wish to develop new skills.
Course Categories
Fabrication & Welding EMTA Diploma
This course is ideal if you are working as a fabricator or welder and wish to improve your skills and knowledge. Level 3 will build on existing knowledge and develop advanced skills in machining, electrical and welding. You must be employed and have gained GCSE grades C or above in English, maths and science, or […]
Course Categories
Fabrication & Welding NVQ Diploma Level 2 & 3 EAL
This is a work based qualification and can only be completed if you are employed in a suitable role. This course is ideal for anyone who is working as a fabricator or welder who wish to improve their skills or knowledge and develop advanced skills. There are no entry qualifications or age limits required by learners to […]
Course Categories
Fundamental Inspection, Testing & Initial Verification Certificate
This qualification is ideal for practising electricians who have not carried out inspection and testing since qualifying or who require some update training before going on to achieve the City & Guilds Level 3 Certificate in inspection, testing and certification of electrical installations (2391-10). It is also suitable for those with limited experience of inspection […]
Course Categories
Initial Verification & Certification of Electrical Installations EMTA Award
This course is ideal for electricians who have recent practical experience of inspecting and testing electrical installations who wish to gain the initial verification and certification qualification. You should have practical experience of inspecting and testing electrical installations to be able to study this programme. You will spend time with our industry experts who will guide […]
Course Categories
Installing Electrotechnical Systems and Equipment EMTA NVQ Diploma (Buildings, Structures & the Environment)
This course is for people wishing to go into the electrical installation industry and are able to attend classes part time over two years. It will provide the essential underpinning knowledge necessary for the National Occupational Standards.
This course is designed for people who wish to train in Electrical Installation and mainly focuses on Installation of Electrical Equipment in Commercial, Domestic and Industrial premises.
Course Categories
Machining skills assessment sessions
Level 1 award in machining skills. Through a range of highly practical sessions you can achieve a nationally recognised qualification that can lead to further and higher training/qualifications. Please note: safety footwear and overalls are required Materials cost: £20
Course Categories
Machining tasters sessions
Introduction to milling and turning. No previous experience required. A highly practical experience leading to further courses where skills can be further enhanced with the possibility of achieving a nationally recognised qualification. Please note: Safety footwear and overalls are required. Materials cost: £20
Course Categories
Mechanical Manufacturing Engineering NVQ Diploma Level 2 & 3
This course is ideal for individuals who are working in a mechanical manufacturing and maintenance engineering role. The course measures their existing competence and improves their knowledge. Level 3 will build on existing knowledge and develop advanced skills.
Course Categories
NICEIC Water Regulations WR01
This course is suitable for all plumbers and engineers involved in the installation, commissioning, service and repair of hot water systems, solar thermal hot water systems or air source/ground source heat pumps. You will be provided with a comprehensive learning package to understand the requirements of Water Regulations and its effects on water supply organisations and […]
Course Categories
OFTEC Oil Assessment (to include OFTEC 101, OFTEC 105E, OFTEC 600A)
We offer various OFTEC courses for experienced oil operatives or plumbing/heating engineers who wish to commission and service oil fired pressure jet burners.
Course Categories
Oxy-Fuel Gas Competence Training & Inspection
This mainly practical course focuses on the essential knowledge and skills required when operating Oxy-Fuel Gas Equipment. This training enables the candidate to comply with legal obligations and current codes of practice. This course is for those individuals that use compressed gases for welding, cutting and similar processes. Oxy/Fuel equipment should only be used by […]
Course Categories
Performing Engineering Operations NVQ Diploma
This course is for those wanting to gain practical engineering skills.
You have an interest in a career in the engineering industry and wish to learn the practical engineering skills to support this.
Course Categories
Performing Engineering Operations NVQ Diploma Level 1 & 2 EAL
This course is designed for individuals who are working in an engineering process operational role and who wish to gain a qualification to demonstrate their skills, competency and knowledge related to their role. Level 2 will build on existing knowledge. This course can be delivered as an apprenticeship.
Course Categories
Performing Manufacturing Operations NVQ Diploma Level 2 EAL
This course is ideal for individuals who are working in a manufacturing role as an operative, team leader or supervisor and who wish to be aware of their working environment and improve their contribution to the job they perform. This course is also available as an apprenticeship.
Course Categories
Periodic Inspection, Testing & Certification of Electrical Installations EMTA Award
This level 3 theory course is for those with significant testing experience. The course is taught over ten half-day sessions of three hours each, in conjunction with the Initial Verification course delivery.
Course Categories
Plant Operations NVQ Diploma Level 2 & 3
This course is ideal for individuals who are working in a plant operations role who wish to improve their skills or knowledge. Level 3 will build on existing knowledge and develop advanced skills.
Course Categories
Process Operations NVQ Diploma Level 2 MPQC
This course is aimed at individuals who are working in a process operations role particularly in the extractive industry and enables them to demonstrate their competency in that sector with an emphasis on health and safety. The course cost is £75-£1450* *Prices vary subject to criteria.
Course Categories
Requirements for Electrical Installations BS7671: June 2008 (2015) (QCF) EMTA Award
This level 3 qualification is primarily aimed at practising electricians with relevant experience and other allied professionals e.g. surveyors, consultants and other trades needing to update and enhance their understanding of IEE Wiring Regulations. It is also suitable for anyone wishing to demonstrate an understanding of the IEE 17th Edition Wiring Regulations (BS7671).
Course Categories
Unvented Hot Water Supply, Commissioning & Servicing NICEIC UVHW
This course is suitable for all plumbers and engineers involved in the installation, commissioning, service and repair of hot water systems, solar thermal hot water systems or air source/ground source heat pumps. To enrol on this course, you will need: A recognised competence in a conventional fuel (i.e. gas, oil, or solid fuel) or a […]
Course Categories
Welding Basic to Advanced (British Standard)
This is a welding course for all; if you are a complete beginner with limited welding knowledge or an advanced welder requiring the British Standard 4872 coding. The Advanced Welding is British Standard 4872 training and testing part 1 (steel) and part 2 (aluminium), the assessments are carried out by a Welding Institute Qualified, CSWIP […]
You are a complete beginner with limited welding knowledge or an advanced Welder requiring the British Standard 4872 coding.
The beginners course is ideal if you want to learn a new skill, if you are creative, if you want to repair your own car or even a garden gate.
Course Categories
Welding Courses (Including MIG, MAGS, MMA, TIG, Oxy-Fuel Gas, Gas Cutting & Fabrication)
A variety of courses to gain an understanding of MIG welding, MMA and fabrication. These short courses are available at various dates throughout the year at our Camborne, St Austell, Duchy Rosewarne and Duchy Stoke Climsland campuses. For further information on all of these courses, please contact our customer service team or register your interest below.
Course Categories
Welding skills assessment sessions
Level 1 award in welding skills. Through a range of highly practical sessions you can achieve a nationally recognised qualification that can lead to further and higher training/qualifications. Please note: Safety footwear and flame retardant overalls are required at all times. Materials cost: £20
Course Categories
Welding tasters sessions
Introduction to welding. No previous experience required. A highly practical experience leading to further courses where skills can be further enhanced with the possibility of achieving a nationally recognised qualification Please note: Safety footwear and flame retardant overalls are required Materials cost: £20