Cornwall College Duchy College Bicton College Falmouth Marine School CCB Training

Oxy-Fuel Gas Competence Training & Inspection

Professional Qualification

Bookmark  

Key Info

Learning Area   Engineering
Delivery Mode   Part-time
Duration   1 - 1.5 Days
Course Code   10611-STA


Dates & Locations

Course Type   Leisure and Professional
Location   Cornwall College St Austell
Start Date   As required
Fees   Tuition Fees: £150.00

This mainly practical course focuses on the essential knowledge and skills required when operating Oxy-Fuel Gas Equipment. This training enables the candidate to comply with legal obligations and current codes of practice.

This course is for those individuals that use compressed gases for welding, cutting and similar processes. Oxy/Fuel equipment should only be used by those who have had adequate training.

Upon meeting the criteria, after attending this course you will be able to operate Oxy-Fuel gas equipment safely and competently.

  What You Will Learn

The legal obligations of owners and users:

The Provision and Use of Work Equipment Regulations
BCGA Code of Practice CP7
Pressure Systems Safety Regulations 2000
The principles and hazards of Oxy-Fuel gas cutting and welding
Introduction to Industrial Gases – Oxygen, Acetylene, Propane
Components, Storage, Handling and Transportation
Oxy-Fuel gas workstations and practical inspection procedures towards BCGA Code of Practice 7, Fault reporting
The correct sequence of Setting up, Leak detection procedures, Lighting up, Flame set recognition, Operating and Shutting down of the Oxy-Fuel gas equipment
Workstation and Underpinning Knowledge tests
Practical gas cutting exercises

  Progression

Practical gas cutting exercises.

  Gallery


 

  Tags


# NightSchool # Gas # Engineering

Courses listed on this website are indicative of the subject, nature and level of study. The College reserves the right to alter specific qualifications titles, awarding bodies and levels of qualification, which can change in year. Any cost may also vary, based on personal funding eligibility. The Cornwall College Group reserves the right to withdraw any course listed at any time.

Download as PDF

  Related Events

Taster Session at Camborne campus

Taster Session at Camborne campus

18 January 2022, 17:00-19:00


Read More

Taster Session at St Austell campus

Taster Session at St Austell campus

18 January 2022, 17:00-19:00


Read More

Open Event at Camborne campus

Open Event at Camborne campus

8 February 2022, 17:00-19:00


Discover the huge range of courses, degrees and apprenticeships available across the Cornwall College campuses in Camborne, Newquay and St Austell.

Read More

Open Event at St Austell campus

Open Event at St Austell campus

8 February 2022, 17:00-19:00


Read More

  Related News

New funding to provide tailored skills to Cornish businesses

New funding to provide tailored skills to Cornish businesses

9th November 2021


A new European Social Funded (ESF) project is helping to boost a range of industry sectors across Cornwall by giving local businesses the bespoke skills, training and qualifications they really need.

Read article

£3,000 apprenticeship hire cash boost extended

£3,000 apprenticeship hire cash boost extended

6th October 2021


A financial boost for employers who take on an apprentice has been extended until January. 

Read article

Veteran college lecturer gets the Tour of Britain rolling 

Veteran college lecturer gets the Tour of Britain rolling 

3rd September 2021


A lecturer from Cornwall College Camborne has been selected as one of only seven Armed Forces veterans to kick off the opening stage of the Tour of Britain.  

Read article

Blog: Getting ready for college!

Blog: Getting ready for college!

23rd August 2021


Read article

Blog: Top tips for results week

Blog: Top tips for results week

6th August 2021


You’ve done it, you’ve reached the long-awaited month of August - here is what you need to know next.

Read article

  Similar Courses

Standards Apprenticeship – Machinist

Level 3 • Work-based • Cornwall College St Austell


This Level 3 apprenticeship is ideal if you want to start your journey to becoming a qualified engineer. The apprenticeship route provides an ideal foundation for a wide range of skills within the engineering field. Within the 4-year apprenticeship you will start from a general engineering platform at the foundation phase (years 1 & 2), where you will learn a grounding in Engineering, with a mix of units. You will learn a range of practical skills, be able to follow technical drawings and work carefully and methodically. The course is 75% practical workshop based with 25% classroom theory work. You will have to complete a range of practical assessments to a high standard alongside reports that detail what you have done and whether you met the required standard. You will then progress onto the development phase (Years 3 & 4) where you will hone your skills specific to your pathway and your job. Learning all the skills and knowledge required in greater depth and understanding that years 1 & 2. This phase is 50% theory and 50% practical. Completing units on a pass/merit/distinction basis. All training is provided by ex-industry experts with many years within their field to guide you through your learning and assessment within the course. Alongside this College based qualificatqualification, you will complete an NVQ style competence qualification. A Cornwall College assessor will walk you through the process of completing report write ups of jobs you do at work. Once you have completed the four qualifications (2 at Foundation and 2 at Development phases) you will progress to an End Point Assessment, where you will be assessed on your skills and knowledge in an interview. Foundation phase units include: - health and safety - Communication - Efficiency and effectiveness - Engineering Maths - Business improvement techniques - Plate Fabrication - MIG & TIG Welding - Sheet metal fabrication - CAD design - Hand fitting - Turning and Milling machining Development phase units include: - health and safety - Communication - Engineering maths - Engineering materials - CAD Design - Advanced Milling - Advanced Turning - CNC Programming We have award-winning partnerships with many world-class organisations in Cornwall, See career progression tab for a list of current apprentice locations. To ensure you gain all the skills needed for a career as an engineer, you will need to start your apprenticeship at the foundation phase. On successful completion you will move through to the development phase, this will lead to employment or you can continue onto our HNC/HND programs.

View course

Diploma in Engineering Technologies

Level 2 • Full-time • Cornwall College St Austell


Engineering shapes the world around us, from the machines at the heart of industry to the electronic devices we use at home – engineering is the future. There’s no better place to start your career in this exciting industry than here at Cornwall College. This course is all about mastering the essential skills that you’ll need during your engineering career, giving you experience with the very latest technology that is used within the industry. The focus is on developing your knowledge application, experimental and practical engineering techniques. Whilst preparing you to professionally present your findings and demonstrate these essential skills. You will be using cutting edge technology such as virtual welding equipment; practising with the latest high spec. equipment such as welding machines commonly used by coded and specialist welders and wiring electrical panels donated by local employer, containing the latest control and automation components – experiences that prepare you for employment locally, regionally and beyond. The Level 2 course is the perfect opportunity to discover the area of engineering you would like to specialise in, with tutors who will guide you through all of the potential opportunities. At Cornwall College we have enthusiastic and highly skilled engineering tutors who are fully committed to helping you develop the skills, knowledge and experience needed to becoming a fully qualified engineer. Successful completion of this course provides you with essential skills to progress onto the Level 3 Advanced Technology course or the Level 3 90 Credit Diploma in Engineering.

View course

Tungsten Inert Gas Welding Skills – Introduction

Level 1 • Part-time • Cornwall College St Austell


Introductory wedling skills, in either MAGS/MIG,MMA or TIG. This qualification will teach you the fundemental underpinning knowledge, relevant to your chosen welding process including, saftey, use of equipment and choice of consumables. You will learn how to set the welding parameters and electrical conditions, relevant to the welding process required and material to be joined. Furthermore you will develop the practical skills required to safely produce five practical welding tests in the flat and horizontal/vertical positions.

View course

Cornwall College https://www.cornwall.ac.uk/wp-content/uploads/2020/03/CC-PLUMBING-GAS-HEATING-2-scaled.jpg NightSchool, Gas, Engineering